The PP guard on the outside of the Membrane Shell serves an important function by protecting the fragile membrane from being cut or torn. Sometimes, however, the holes in the guard get filled with paint solids, interfering with the efficient operation of the Anode Cells. If you suspect that you might have this condition, call UFS Corporation at (219) 464-2027 ext 24 or email Steve Jovanovic at email@example.com for information on how to clean or remove the guard.
When it comes to spare parts, do you feel locked-in and over-charged? Do parts take a long time to arrive? Feel like you are being taken advantage of?
If your E-coat tank uses C-cells or box cells, you may be experiencing a feeling of powerlessness. You can break free! UFS Corporation wants you to try the original TECTRON™ Anode Cell. It was the first tubular anode cell that revolutionized the industry and put smiles on the faces of customers worldwide.
We are so sure you will like our products that we are willing to provide a free TECTRON Cell to C-cell users (and many of the 'copy-cat' cells) or two TECTRON Cells if you are still using a box anode cell. This is a complete cell that you can install in your system and get an actual side-by-side comparison.
To learn more about the TECTRON Anode Cell Evaluation Program visit our website at ufsc.com. Or contact Maureen Faherty at (219) 464-2027 x28 or email her at firstname.lastname@example.org.
Floor Anodes are better utilized when placed in the front of the E-Coat paint tank. The purpose of the Floor Anodes is to get a paint film started on the bottom exterior of the car body very early in the cycle. Once this is done, the Side Cells can concentrate on getting film started in the hard to reach regions of the Rocker Panel, B Pillar and interior of the body.
Another benefit of frontal placement is that the differential of highest (i.e., vertical exterior door) to lowest (i.e., B Pillar, et al) is generally lower when there are Floor Anodes (Roof Anodes too) located very early in the E-Coat paint cycle.
If your Floor Anodes are located at the back of your E-Coat tank and you aren't satisfied with the distribution variation around the car body, then you could benefit from moving the Floor Anodes to a more forward position.
For more information , visit the download center at our website ufsc.com - click on Membrane Electrode - Product Data Sheet - #995108.
Are You Prepared For Winter Shutdown? From Ultrafiltration Systems to Precious Metal Anodes; TruIDL™ Data Logger to ME Shells; we have everything you need for electrocoating. Order your spare parts today. For spare parts and pricing information, contact Maureen Faherty at (219) 464-2027 ext. 28 or email her at email@example.com.
Kudos to our Production Department for building our largest UF System ever. The 18’ x 8’ double-sided stainless steel system was shipped today. And it’s a beauty. Another job well done!
To learn more about UFS Ultrafiltration products, visit the download center at our website ufsc.com - click on ultrafiltration – product catalog. For further details and pricing, contact Maureen Faherty (219) 464-2027 x28 or Maureen.firstname.lastname@example.org.