Looking for something?
Try our search.

search
Quick Links

ME Cells
Accessories
Instrumentation
Ultrafiltration
Benefits
VirtualE-Coat


Best Practices for Low Profile Cells GuideBest Practices for Low
Profile Cells Guide!

FREE Engineering ToolboxFREE Engineering
Toolbox

Thinking about going thin? Cost Savings Fact SheetThinking about going thin?
Cost Savings Fact Sheet

Try our new Alkaline Cleaner Stage Annual Tank Dump Expense estimatorTry our new Alkaline Cleaner Stage Annual Tank Dump Expense Estimator!

UFS Corporation
330 North 400 East
Valparaiso, IN 46383-9704
(219) 464-2027



Accessories Download Spec Sheets
CLAMPS
are metal, two-piece, electro-galvanized, and are used for attaching cells to the strut channel. Two required per Cell.
 
SPLASH GUARDS
are placed on top of the Cell to prevent paint drips or spray from entering the Cell.
 
CABLE LEADS
have a quick electrical connect with covers and are 1500 mm (5 feet) long. One required per cell.
 
75 AMP COPPER SET SCREW LUGS
accepts up to five cable leads, speeding up field electricity installation work.
 
FLOW INDICATOR
displays a flow range of 1.1 - 2.2 lpm (0.3 - 0.6 gpm) for each TECTRON SD Cell or a flow range of 1.5 - 3.4 lpm (0.4 - 0.9 gpm) for TECTRON HD Cell. These connect the supply manifold and supply tubing. One required per cell.
 
RETURN TUBING
is clear PVC and connect the overflow nozzle of the Cell and the return manifolds. One meter (three feet) required per Cell.
Home | About Us | Products | News | Electrocoating | Contact Us | Download Center
truth-observant
truth-observant
truth-observant
truth-observant
sss